Strip foundations carry the support, for the walls and the roof construction. The cavities, are filled and compacted, and first provided with a clean layer of cement. Than loaded with a barrier layer, which goes through the wall washers and afterwards poured out with an reinforced ground plate. We usually use this foundation type for garages, small buildings, pool houses, outside areas etc., and process certified barrier layer products, which means with release for the use at new constructions, which fulfill the current construction requirements.

Independently either with or without underlying strip foundations, your house can be built on a continuous reinforced concrete ground plate. This type of foundation provides a continuous “horizontal barrier” and is protected against running water and rising humidity. This is one of the highest quality methods of construction that can be found on the market and offers maximum protection.

Reinforced ground plate, as the name suggests, means an iron reinforced concrete layer. This uses quality class concrete and in addition iron netting for the structure of the building. Shortly explained the ground plates which are set up on the wall plates intercept for a corresponding iron construction.

At our standard house types (E020, D110, D220, T320) the “increased foundation” is always used:

After the underlay concrete, the shuttering is installed in the excavated earth level. Iron, as project specification for kg/m3, earthing, concrete quality class as planned, from concrete plant and vibrated on site.

Massive full-carrier block stone masonry, also called “bloques áleman”.

A line for inboard block stone masonry and a line for the natural stone covering at house type D220, T320. The increased foundation is closed off with surrounding wall ties, in the price included is a total hight of approximately 80 cm including the wall ties plus foundation strips.

Important: Hanging cover installations are done, wherever possible and where sufficient ventilation of the increased foundation is guaranteed. We feel free to change the foundation type depending on the excavation.

Massive full-carrier block stone masonry (20cm strong), also called “bloques áleman”, plastered from the inside. From the outside cement plaster with humidity barrier (up to 1 cm), and fabric-reinforced external plaster.

If you wish, garages and outbuildings (like machine-rooms and so on) can be constructed with uninsulated single-shell block stone masonry or alternatively sandstone masonry.

It is recommended to make a building usage analysis, to ensure that the construction type is suitable.

Massive full-carrier block stone masonry (20cm strong), also called “bloques áleman”, plastered from the inside. From the outside cement plaster with humidity barrier (up to 1 cm), isolation (here 6cm strong) and fabric-reinforced fine plaster. In Spanish this is known as “fachada SATE”, similar to the German thermal insulation system. Alternative material is from “Caparol Almareno 700” with Dalmata Poliestereno Espandido (density 20 and calibrated) or from the company “Isaval” in the same quality class.

Building with mixed masonry to almost equal parts.

50% variety E020 and 50% variety D220. The enclosed sketch serves as illustration. The exact facade division of your real estate can differ from the one shown.

Massive full-carrier block stone masonry (20cm strong), also called “bloques áleman”, plastered from the inside. From the outside cement plaster with humidity barrier (up to 1 cm), isolation (here 4,5cm strong), and before bricked approximately 25 cm nature stone masonry, self carrying, massive, fully stocked and filled with cement and colored mortar conclusion. The house edges, window and door borders decorated with mares stone as full material.

The natural stones can be formed to 90 degree angle to build the conclusion, or with mares stone cut to miter and decorated glued circulating. We process various ways and techniques.

Massive full-carrier block stone masonry (20cm strong), also called “bloques áleman”, isolated from the inside (here 4,5cm strong), and before bricked with an additional 10 cm nature stone masonry, plastered from the inside. From the outside cement plaster with humidity barrier (up to 1 cm), and before bricked approximately 25 cm natural stone masonry, self carrying, massive, fully stocked and filled with cement and colored mortar conclusion. The house edges, window and door borders decorated with sandstone.

The natural stones can be formed to 90 degree angle to finish or with sandstone cut to miter and decorated circulating. We use varying techniques as appropriate.

Prefabricated H-concrete carrier (semi-resistant) with hollow stone elements in between to fill the spaces. Over it, combined concrete layer with strengthened electric welded iron matts. The visible underside is plastered. Ideal for LED-spots in smooth ceilings.

Wooden beams with clay records lying in between and covered with a combined concrete layer with strengthened electric welded iron mats. You can enjoy the view of the natural wood, seeing the strong beams interspersed with clay records, which are manufactured and fired here in Mallorca from local raw material.

Prefabricated uni-directional concrete beams (resistant beams), with extended ends fitting into the ring anchor iron mesh, the interspaces filled up with hollow stone elements, interspaces with strengthened iron and on there lying complete and distributed electric welded iron mats. Here the static ceiling and the combined-concrete-layer are poured out to one unit. The visible underside is plastered. This roof-construction-system can be compared with the construction of a brick ceiling.

Tension concrete – final-ceiling with circulating ring anchors – recommended for roofes over 5,5/6,0 meters. The ceiling constructions above work statically seen also for larger spans, but this way you lose the feeling of comfort. To avoid transmitting vibrations in the basement ceiling you work at middle ceilings with a span but approximately with 6,0 meter tension concrete ceiling. These do not just guarantee perfect statical hold by similar ceiling strength, but also avoid upcoming noticeable vibrations when entering, and increase the feeling of the construction quality. Another advantage of tension concrete ceiling, is the reduced amount of time required for installation. Even though the final ceiling can be walked directly, it is recommended to instal the screed and the flooring after the separating layer.

Prefabricated concrete-H steel beams with filled out interspaces through hollow block stone elements. Concrete layer with electric welded iron matts, PVC or asphalt foil to protect against water/ humidity. Insulation suitable to the particular type of house. Then a cement layer with fiberglass shavings is layerd on top amd finally roof tiles in the monk-nuns style. 

We try to realize an easy changing construction system, which is similar to this, as in the description of version A!

Wooden or concrete beam imitation wood, filled with clay tiles in between. Barrier foil and on top a concrete layer with chips. PVC or asphalt foil for sealing against the entering of water/ humidity.

Insulation suitable to the particular type of house followed by cement layer with fiberglass shavings and strengthened electric welded iron mats is added. Finally roof tiles laid with monk-nuns style.

Middle ceiling installed as usual. Substantiated four-side or two-side slanted-roof construction (in Germany similar to the tent-roof or saddle-roof) with ventilation cavities. Easy burned clay plates laid with blocking foil. Concrete layer strengthened with shavings, PVC or asphalt foil to compact against water/ humidity and insulation suitable to the particular type of house followed by cement layer with fiberglass shavings and strengthened electric welded iron mats is added. Finally roof tiles laid with monk-nuns style.